NEWDI

THE CONCEPT OF GNSS RTK STATION REDEFINED

Start your projects in fractions of seconds The M2 GNSS station is an all-in-one RTK GNSS station. No more cables or external batteries. No need to take many accessories, resulting in easier operation. The simplicity of the setup process improves work efficiency at least 3 times compared to conventional external radio solutions. Beyond a simple GNSS station, the M2 also includes a 4G modem for transmitting GNSS corrections via TCP/IP serve.

LOWER CONSUMPTION, LONGER AUTONOMY, BROADER COVERAGE!

Increased performance with 50% less power consumption The M1 GNSS electronics design significantly reduces power needs without sacrificing the UHF modem's performance. Its high-capacity batteries provide up to 15 hours of continuous operation when transmitting RTK corrections at 5 watts power output. With UHF coverage of up to 8 km in typical survey operations, and up to 5 km in difficult conditions such as wooded and suburban areas

BEST GNSS SIGNAL TRACKING IN ITS CLASS

Full GNSS with 1408 channels and advanced multipath mitigation. The state-of-the-art 1408-channel GNSS technology leverages GPS, GLONASS, Galileo and BeiDou. The M2 integrates cutting-edge GNSS antenna technology and multipath mitigation algorithms to ensure that the highest quality GNSS corrections are transmitted to the GNSS rovers

Performance Specification

GNSS characteristics

Channels :
UM980
1408 Channels, Powered by NebulasIVTM
BDS: B1I, B2I, B3I, B1C, B2a, B2b
GPS: L1C/A, L1C, L2C, L2P(Y), L5
GLONASS: G1, G2, G3
QZSS: L1C/A, L1C, L2C, L5, L6
NavIC: L5
SBAS: L1C/A
PPP: B2b & Has
Update Rate: 20Hz
Real time kinematic (RTK):
H:±（8+1×10-6D）mm
V:±（15+1×10-6D）mm
Static and rapid static:
H:±（2.5+0.5×10-6D）mm
V:±（5+0.5×10-6D）mm

Electrical

Battery Specifications:
3.65V 24000mAh
Static working time: 50h
RTK working time: 15h
Rated Input Voltage：5-Pin Port：15V DC,,2A
Type-C Port：12V DC,1.5A

Communications and data storage

Operating System: Linux
Built-in Storage: On-board Storage: 8 G
Bluetooth V5.0+EDR (Backward Compatible) / BLE
Wi-Fi: 802.11 a/b/g/n/ac
Network: Communication 4G Supported
Radio Transceiver: 5W, Supports LoRa
Frequency: 410~470MHz
Protocols TrimTalk 450S、PCC-GMSK、PCC-4FSK、Satel、Satel_ADL、HITARGET(9600)、HITARGET(19200)、TrimTalk(4800)、HZSZ、TrimMark III、South 9600、South 19200、GEOTALK、GEOMARK、PCCFST、PCCFST_ADL、PCCEOT_SATEL
MEMS: Max. 60° Supported;
Accuracy: 8mm+0.3mm/°tilt;
Pole Tip Positioning Accuracy: Within 2cm at 30° Tilt
TNC Connecting Built-in Radio Antenna
5-Pin Connector: External Power Supply and External Radio
Type-C Port: Charging and Data Transmission
SIM Slot: SIM Card

Hardware

Buttons: Power Button (For Power On/Off)
Short Press to Broadcast Current Working Mode and Status
Display Screen: Equipped
Dimensions: 151mm*110mm (Including TNC; 97mm Excluding TNC)
Weight: 1.5Kg
Operating Temperature: -30℃ ～ +65℃
Storage Temperature: -40℃ ～ +80℃
Waterproof & Dustproof IP67
Drop Withstands 2m Pole Drop (Hardwood Floor) and 1.2m Free Fall at Room Temperature
Humidity 100% Condensation Resistant